Fans & Blowers
We select, design, manufacture and supply a wide range of centrifugal and axial flow fans for all types of applications including material handling, high pressure, high volume, contaminated air and high temperature.
We manufacture in a range of materials including mild steel and stainless steel. We design High Efficiency fans on the latest computerised selection programs which will supply GA drawings, curves and noise levels at quotation point.
Centrifugal Fans
Centrifugal fans are used for the most varied types of applications such as transport of clean, dusty, corrosive, abrasive and high temperature air and gases.
SH Type
- 16 fan models suitable for clean or slightly dusty air and gas
- Backward curved blades
- Capacity up to 450.000 m3/h
- Pressure up to 700 mm c.a.
- Impeller diameter up to 2500 mm
- Max efficiency 86%
GPH Type
- 18 fan models suitable for clean air and gas maybe containing dry non-abrasive dust
- Backward curved blades
- Capacity up to 350.000 m3/h
- Pressure up to 550 mm c.a.
- Impeller diameter up to 2500 mm
- Max efficiency 86%
RB Type
- 20 fan models suitable for clean or slightly dusty air and gas
- Backward flat blades
- Capacity up to 120.000 m3/h
- Pressure up to 800 mm c.a.
- Impeller diameter up to 2500 mm
- Max efficiency 84%
Axial Fans
Alongside a wide range of centrifugal fans, Arivent manufactures impellers and axial fans suitable for satisfying any performance requirement
AT Series
Series AT, built with V-belt drive and suitable for high demanding services, when fluid to be transported is very aggressive or hot. Special versions for high temperatures (400 °C) with forced cooling of V-belt drive and using of special steels for impellers and drums.
AC series
The AC series, with impeller directly keyed to the crankshaft, suitable for fume extraction, dusty and humid air in foundries, cement factories, paper mills and carpenters. It can be set up with long or short drum, depending on the installation needs.
